Advertisement
Advertisement

Topsoil & Raised Bed Soil Calculator

Fill one or more raised beds, or spread topsoil over an area, and get the volume, the mix and the bags to buy.

🔒 Everything runs in your browser. Nothing you enter or open here is uploaded to a server.
10
Soil sinks as it is watered.
—
Total soil needed
  • Volume before extra—
  • Cubic yards—
  • Cubic feet—
  • Cubic meters—
  • Approximate weight—

Amount of each material

    Bags (rounded up)

    Estimate only. Real projects vary with waste, cuts, product coverage and site conditions. Buy a little extra, check the coverage printed on the product, and ask a licensed professional for structural, electrical or code-related work.

    How to use the Topsoil & Raised Bed Soil Calculator

    1. Choose US or Metric units, then choose whether you are filling raised beds or spreading soil over an area.
    2. For beds, enter how many, the length and width of each, and how deep the soil will be. For an area, enter its size and the depth to spread.
    3. Pick a soil mix. A single material uses the whole volume. The mixes split it into topsoil, compost and other, or enter your own percentages.
    4. Keep or change the extra for settling, then read the total volume, the amount of each material and the number of bags.
    5. Optionally type your own bulk or bag price to see the cost.

    How it works

    Volume is area × depth. For raised beds the tool multiplies length × width × depth by the number of beds. For an area it works out the area of the rectangle, circle or number you enter and multiplies by the depth. The depth is converted from inches to feet (or centimeters to meters) first, and 27 cubic feet make a cubic yard.

    Fresh soil settles, especially after the first watering, so many gardeners add about 10% to the volume. The tool applies that extra to the total and then splits the total into the materials of the mix. A common recipe for vegetable beds is roughly 60% topsoil, 30% compost and 10% of something that keeps the mix loose, such as coarse sand or perlite; garden centers sell ready-made blends too, and recipes differ, so use the percentages you prefer.

    The weight estimate uses typical loose densities of about 1.1 short tons per cubic yard for topsoil, 0.5 for compost and 1.3 for sand-like material. Wet soil is much heavier than dry soil, so check with your supplier if you are loading a trailer.

    Example: two beds that are 8 × 4 ft and 12 in deep hold 2 × 32 = 64 cu ft, or 2.37 cu yd. With 10% extra that is 70.4 cu ft, about 2.6 cu yd. Using the 60/30/10 mix, that is about 42 cu ft of topsoil, 21 of compost and 7 of other.

    Frequently asked questions

    How much soil do I need for a raised bed?
    Multiply length × width × depth. A 4 × 8 ft bed filled 12 inches deep holds 32 cubic feet, a little more than 1 cubic yard. The calculator does this for several beds at once and adds an allowance for settling.

    How many bags of soil make a cubic yard?
    A cubic yard is 27 cubic feet, so it takes 27 bags of 1 cu ft, or 13.5 bags of 2 cu ft. Bulk delivery is often cheaper for large jobs.

    How deep should topsoil be for a lawn?
    Many people spread about 4 to 6 inches (10 to 15 cm) of topsoil when starting a new lawn, and about 1/4 to 1/2 inch (0.6 to 1.3 cm) when top-dressing an existing one. Your local conditions and soil test may suggest something different.

    Can I fill a raised bed with only topsoil?
    You can, but plain topsoil can pack down and drain slowly in a deep bed. Mixing in compost and a coarse material keeps the mix looser. Choose a mix preset to see how much of each to buy.

    Should I fill the whole depth of a tall bed with soil?
    Not necessarily. Some people put logs, branches or other coarse material at the bottom of a very deep bed to save soil. If you do, enter only the depth of soil you will buy.

    Advertisement

    You might also need